{}

Impact-Company-Logo-English Black-01-177x54

Welcome to the Schneider Electric corporate Website

How do I upgrade the firmware on an APC Network Management Card (NMC) or...

Issue You wish to upgrade your Network Management Card's (NMC) firmware or have been instructed to. You have a device such as a Smart-UPS, Smart-UPS Ultra, Easy UPS On-Line, Easy UPS 3-Phase,...

What is 2 - wire and 3 - wire control in Altivar VFD?

1. Two wire control means, two wires for drive start command of "Forward and Reverse". In two wire control there is no separate stop command is provided. The forward and reverse command is...

PowerLogic PM5000 Series (PM5100, PM5300, PM5500) Modbus Register List

Issue Register list for Modbus communication Product Line PM5110, PM5330, PM5340, PM5560, and PM5563 Environment Power Meter Communications Modbus Register List Cause PM5000 series register list is...

How can I connect SoMove to an Altivar Process drive via Ethernet TCP/IP...

Issue: Connecting SoMove to the VFD using the Ethernet network connection. Product Line: ATV61 ATV71 ATV630 ATV930 ATV320 ATV340 ATV32 ATV320 Environment: Ethernet IP or Profinet option installed....

Where can I download Ecostruxure Power Design - Ecodial ?

Ecostruxure Power Design - Ecodial is a Software - To "Design, calculate & size the equipment's" for your electrical installation. The Electrical installation sizing is in...

How to assign a logic input to freewheel stop on Altivar 61 and 71?

Issue: Freewheel stop assignment on ATV61/71. Product Line: Altivar 61 and 71 Environment: All models and serial numbers Cause: None Resolution: Go to Drive menu, 1.7 Application function menu, and...

Is it possible to rotate the DMCR or DGPT2 protection in Oil Distribution...

It is possible in Oil Distribution Transformers, but can only be done by an authorised service. Please consult to Schneider since unauthorised attempt will cause warranty loss.

iDisplay Touch screen drivers for W 7 32 and 64 bits

Drivers Windows 7 for iDisplay iDisplay Touch screen drivers for W 7 32 and 64 bits Goals and Symptoms Currently, our iDisplays are supplied only with the Windows XP drivers for Touch screen. The...

Show more
Popular Video FAQsPopular Videos
Show more
Learn more through our Generic Knowledge FAQsGeneral Knowledge
What’s AC-3e rating means and what’s their application ?

AC-3e rating is the capability of the contactor for starting and switching off high efficiency squirrel cage asynchronous (IE-3/ IE-4) motors during running and reversing operations, which have...

How to establish the communication with S7-1500 PLC if using TIA Portal...

In PLC side: 1.Use TIA Portal V11-V16 to configure the PLC communication settings. 2.Select the PLC and enter the correct version of the firmware (We can check for the firmware version of the PLC in...

What are the effects of dV/dt on a Motor when using a VSD?

As there is an impedance mismatch at the termination of the motor cable to the motor, there will be a reflected wave which travels back along the motor cable causing overvoltage’s. Overvoltage’s on...

What is Power Factor Correction (PFC) - Does it help conserve energy?

Issue: What is Power Factor Correction (PFC) - Does it help conserve energy? Answer: Explanation 1: Power Factor Correction (PFC) doesn't directly reduce the overall electric consumption of a...

What is a PEP (Product Environmental Profile) and what is it used for?

The 3rd party validated (Type III) PEP according to ISO 14025 provides transparent, comparable and reliable environmental data on product level, e.g on carbon footprint (CO2 eq). Standardized...

How to disable the system error popup window in Vijeo Designer?

Please refer to the setting in the following picture: The setting gives you the option to turn system error window on or off. Select Yes to show system error message window on the panel at runtime....

How to change the Cipher Suites of an NMC3?

Question : How to change the Cipher Suites of an NMC3 Product Line / Environment : Network Management Card 3 – AP9640/AP9641/ AP9643 and/or Devices with an embedded Network Management Card 3 Answer :...

Adding a new DD to your TREX

Before getting started make sure that you have Upgrade Studio installed on your laptop and that you have an account to log in. You also must have already activated your TREX communicator. Go to...

Show more